Full Protection Intelligent Accumulator Detector

Description

HN Full Protection Intelligent Accumulator Detector

Suits for 12V/24V Battery Working Voltage:8-30V Working conditions:-10 to 50? Testing method: Kelvin four-wire detection Battery aH range: 3-2000AH

Test instructions: (1) Clamp red clip to positive, Black to negative. (2) Choose the type of your battery(First one is UNIVERSAL TYPE), then press “Confirm”(the middle button) (3) Choose the standard of your battery, then press”confirm” (4) Set the Maximum Discharge Current match to your battery, then press”confirm” (5) Check the status of your battery

If the battery to be tested does not have any factory standard parameters for test options, it can be tested according to the «Battery capacity and CCA comparison table», first select STD (universal) for the battery type, CCA standard for the test standard, and compare according to the capacity of the battery«Battery Capacity and CCA comparison table».set the battery factory discharge current, and then detect

Notices:

1. This product is only suitable for lead-acid batteries with a voltage of 12-24V. When the voltage exceeds DC30V, it will protect against overvoltage and cannot test the battery.
2. Lithium batteries are prohibited from testing?
3. The power supply mode of this product is battery power supply. If the battery voltage is lower than 8V, the product cannot work. Please fully charge the battery before testing.
4. Cannot test when the battery voltage is higher than 30V (product overvoltage protection)
5. When the battery is fed or the power is insufficient, it is recommended to leave it for 10 minutes after fully charged, so that the data is more accurate